Table of Contents
Advertisement
Chapter 3: Terminal Menu Operation and Structure
Status/LAN Stats
Read security: 5
This menu contains statistics for the Ethernet port.
Tx Packets - Packets transmitted out the Ethernet port
Rx Packets - Packets received from the Ethernet port
Tx Errors - Total transmit errors encountered on Ethernet port
Rx Errors - Total packets received in error and dropped
Clear Counts - When activated, clears all LAN Stat counts.
Status/IP Stats
Read security: 5
This menu contains IP statistics that can be useful when diagnosing problems.
All are taken from the SNMP MIB-2 variables.
TCP failed attempts
TCP passive connections
TCP current connections
TCP segments sent
TCP segments received
Total TCP resets
Active TCP connections
Total TCP retransmits
UDP datagrams sent
No application at dest. port
UDP datagrams received
UDP bad packets
96
Single Collisions - total single collisions before successful
transmission
Multiple Collisions - total multiple collisions before successful
transmission
Excessive Collisions - total collisions that resulted in packet being
dropped
Deferred Transmissions - total packets deferred due to collisions
Carrier Sense Errors - total carrier sense errors encountered (no
link integrity)
CRCs - total packets detected with CRC errors
Giants - total packets received that were greater than 1518 bytes
Runts - total packets received that were less than 64 bytes
Rx Collisions - total collision occurred during reception
Express XL/XLT User Manual
61200.070L1-1
Advertisement
Table of Contents
Troubleshooting
