ADTRAN Express XL 1200070L1 User Manual page 143

Appendix B: Log Messages
Bandwidth drop
level 4
The Express XL/XLT is dropping a B-channel call in order to reduce band-
width.
Bandwidth request
level 4
The Express XL/XLT is dialing another B-channel in order to increase band-
width.
Bandwidth Restore
level 4
The Express XL/XLT is re-dialing destination to restore original bandwidth
after POTS call bump or unexpected call drop.
Bearer Info Cap Incorrect
level 2
The bearer capability received in an information element from the switch was
invalid.
Bearer Mode Incorrect
level 2
The bearer mode received in an information element from the switch was in-
valid.
BUSY
level 2
Called location was busy.
Call lost <number>
level 5
The Express XLT attempted retrieve a previously held call but the call was lost
for unknown reasons. If no caller ID is available for the ISDN line, then <num-
ber> will be blank for incoming calls.
Caller ID mismatch
level 3
The caller ID number did not match the numbers placed in Configuration/
Connection List/Authentication parameters Call ID 1 or Call ID 2.
61200.070L1-1 Express XL/XLT User Manual 127