Siemens HN678G4.1 User Manual And Installation Instructions page 35

Hide thumbs Also See for HN678G4.1:
Table of Contents

Advertisement

24  Rails
To thoroughly clean the rails and the cooking compart-
ment, or to replace the rails, you can remove the rails.
24.1 Detaching the rails
WARNING ‒ Risk of burns!
The shelf supports get very hot
Never touch the shelf supports when hot.
Always allow the appliance to cool down.
Keep children at a safe distance.
Lift the rail forwards slightly
1.
Push the entire rail backwards
2.
Clean the rail.
3.
→ "Cleaning products", Page 28
24.2 Fitting the retainers
The retainers may fall out when you detach the rails.
Note:
The retainers at the front differ from those at the rear.
Hook the front retainers with the hook into the round
1.
hole at the top and set them at a slight angle
and detach it
⁠ .
and take it out
⁠ .
⁠ .
Hook the front retainers in at the bottom and
2.
straighten them
⁠ .
Hook the rear retainers with the hook into the top
3.
hole
and push them into the bottom hole
24.3 Attaching the rails
Notes
¡ The rails only fit on the right or left.
¡ For both pull-out rails, ensure that you can pull them
forwards and out.
Hook the rear shelf support into the retainers at the
1.
top and bottom
and pull it forwards
Hook in the rail at the front
2.
Rails en
⁠ .
⁠ .
and press it down
.
35

Advertisement

Table of Contents
loading

Table of Contents