Symbols; Abbreviations - Bosch Rexroth RE 07601-B Operating Instructions Manual

6/36 About this documentation
Bosch Rexroth AG, manifolds and modules, RE 07601-B/12.2013
• warning sign: Draws attention to the danger
• Signal word: Identifies the degree of danger
• Type and source of danger!: Specifies the type and source of danger
• Consequences: Describes the consequences in case of non-compliance
• Precaution: Specifies how the danger can be prevented
Table 2: Risk classes according to AnSI Z535.6-2006
warning sign, signal word
DAnGER
wARnInG
CAUTIOn
NOTICE

1.3.2 Symbols

The following symbols indicate notices which are not safety-relevant but increase
the comprehensibility of the documentation.
Table 3: Meaning of the symbols
Symbol Meaning
If this information is not observed, the product cannot be used and/or
operated optimally.
▶ Individual, independent action.
1.
Numbered instruction:
The numbers indicate that the actions must be carried out one after the other.
2.
3.

1.3.3 Abbreviations

The following abbreviations are used in this documentation:
Table 4: Abbreviations
Abbreviation Meaning
ANSI American National Standards Institute
EMC Electro-magnetic Compatibility
PE Protective Earth (protective earthing conductor)
Meaning
Indicates a dangerous situation which will cause death or
severe personal injuries if not avoided.
Indicates a dangerous situation which may cause death or
severe personal injuries if not avoided.
Indicates a dangerous situation which may cause minor or
medium personal injuries if not avoided.
Damage to property: The product or the environment could
be damaged.