Assembling The Manifold/Module - Bosch Rexroth RE 07601-B Operating Instructions Manual

Manifolds and modules
Table of Contents

Advertisement

20/36
Assembly
Bosch Rexroth AG, manifolds and modules, RE 07601-B/12.2013

7.5 Assembling the manifold/module

Faulty fastening!
Incomplete fastening of the manifold/module or mounting using mounting bolts of
reduced stability may cause the product to become loose and fall down and lead to
personal injuries and/or damage to property.
Completely assemble the manifold/module according to the assembly specifica-
tions by means of suitable assembly aids.
Mount the manifold/module only at suitable mounting surfaces.
Use only mounting bolts according to the dimensions and property classes
specified in the installation drawing.
Comply with tightening torques and screw stabilities.
Faulty assembly of plug screws and lines!
Improperly fastened plug screws and lines may become loose during subsequent
operation and fly around due to the pressure and thus cause serious injuries.
Only pressurize your system after all plug screws and lines have been completely
and properly mounted according to the specifications.
Insufficient assembly space!
Risk of jamming and bruising! Insufficient installation space may lead to jamming or
abrasions in case of actuation or adjustment works at components of the manifold
block/module.
Make sure that the assembly space is sufficient and that actuation and adjust-
ment elements as well as plug-in connectors are easily accessible.
leaking hydraulic fluid!
Hydraulic fluid may leak during assembly and disassembly of hydraulic components.
Consequently, persons may slip or fall!
Only remove the protective caps at hydraulic manifolds/modules directly before
the assembly.
Immediately remove leaked hydraulic fluid and dispose of it properly.
Incorrect connection of electric components!
Risk of short-circuit and damage!
Connect the electric components according to the electric circuit diagram and
the pin assignment.
Missing seals and caps!
Liquids and foreign particles may penetrate and damage the product.
Ensure before the assembly that all seals and caps of the connections are tight.
wARnInG
CAUTIOn
NOTICE

Advertisement

Table of Contents
loading

Table of Contents