Instrument Cluster Descriptions - Jeep WRANGLER RUBICON 392 2021 Features Manual

I C D
NSTRUMENT LUSTER ESCRIPTIONS
1. Tachometer
Indicates the engine speed in revolutions

per minute (RPM x 1000).
CAUTION!
Do not operate the engine with the
tachometer pointer in the red area. Engine
damage will occur.
2. Instrument Cluster Display
The instrument cluster display features a

driver interactive display.
3. Speedometer
Indicates vehicle speed.

4. Temperature Gauge
The temperature gauge shows engine

coolant temperature. Any reading within
the normal range indicates that the
engine cooling system is operating satis-
factorily.
The pointer will likely indicate a higher

temperature when driving in hot weather,
up mountain grades, or when towing a
trailer. It should not be allowed to exceed
the upper limits of the normal operating
range.
WARNING!
A hot engine cooling system is dangerous.
You or others could be badly burned by steam
or boiling coolant. You may want to call an
authorized dealer for service if your vehicle
overheats.
CAUTION!
Driving with a hot engine cooling system
could damage your vehicle. If the
temperature gauge reads "H" pull over and
stop the vehicle. Idle the vehicle with the air
conditioner turned off until the pointer drops
back into the normal range. If the pointer
remains on the "H", turn the engine off
immediately and call an authorized dealer for
service.
GETTING TO KNOW YOUR INSTRUMENT PANEL
5. Fuel Gauge
The pointer shows the level of fuel in the

fuel tank when the ignition switch is in
the ON/RUN position.
The fuel pump symbol points

to the side of the vehicle where
the fuel filler door is located.
5
2