Jeep WRANGLER RUBICON 392 2021 Features Manual page 13

CAUTION!
Towing the vehicle, coasting, or driving for

any other reason with the transmission in
NEUTRAL can cause severe transmission
damage.
Refer to "Recreational Towing" in "Starting

And Operating" or "Towing A Disabled
Vehicle" in "In Case Of Emergency" in the
Owner's Manual for further information.
DRIVE (D)
This range should be used for most city and
highway driving. It provides the smoothest
upshifts and downshifts, and the best fuel
economy. The transmission automatically
upshifts through all forward gears. The DRIVE
position should be used for all normal operating
conditions.
When frequent transmission shifting occurs
(such as when operating the vehicle under
heavy loading conditions, in hilly terrain,
traveling into strong head winds, or while towing
a heavy trailer), use the AutoStick shift control
to select a lower gear Ú page 12. Under these
conditions, using a lower gear will improve
performance and extend transmission life by
reducing excessive shifting and heat build-up.
During extremely cold temperatures (-22°F
[-30°C] or below), transmission operation may
be modified depending on engine and
transmission temperature as well as vehicle
speed. Normal operation will resume once the
transmission temperature has risen to a
suitable level.
MANUAL (M)
The MANUAL (M, +/-) position (beside the DRIVE
position) enables full manual control of
transmission shifting also known as AutoStick
mode. Toggling the gear selector forward (-) or
rearward (+) while in the MANUAL (AutoStick)
position will manually select the transmission
gear, and will display the current gear in the
instrument cluster Ú page 12.
Transmission Limp Home Mode
Transmission function is monitored
electronically for abnormal conditions. If a
condition is detected that could result in
transmission damage, Transmission Limp
Home Mode is activated. In this mode, the
transmission may operate only in certain gears,
or may not shift at all. Vehicle performance may
STARTING AND OPERATING
be severely degraded and the engine may stall.
In some situations, the transmission may not
re-engage if the engine is turned off and
restarted. The Malfunction Indicator Light (MIL)
may be illuminated. A message in the
instrument cluster will inform the driver of the
more serious conditions, and indicate what
actions may be necessary.
In the event of a momentary problem, the
transmission can be reset to regain all forward
gears by performing the following steps:
NOTE:
In cases where the instrument cluster

message indicates the transmission may not
re-engage after engine shutdown, perform
this procedure only in a desired location
(preferably, at an authorized dealer).
Even if the transmission can be reset, we

recommend that you visit an authorized
dealer at your earliest possible convenience.
Authorized dealers have diagnostic
equipment to assess the condition of your
transmission.
11
3