Table of Contents
Advertisement
Draining
When the tank is full (approximately 4.7 L), the unit automatically stops and the FULL lamp lights.
Please empty the tank.
When the water tank becomes full, the FULL lamp lights.
1
Remove the water tank.
Place your hand on the
handle and carefully
pull the water tank out
straight to prevent water
from spilling.
2
Remove the tank lid, and pour out
the water.
Tank Lid
Tank
Guard
Floating Element
Do not remove or
dismantle the floating
element.
z FULL lamp lights.
(There will be continuous sounds "bleep bleep bleep".)
z Airflow stops.
(Louvre stops.)
z LCD indicators go out.
Hold the water tank.
Pour the
water out
from here.
z After pouring out the water, replace the water tank,
and the FULL lamp will go out. The unit restarts.
z When the FULL lamp is on, other operations
are forbidden except for pressing the POWER
switch.
z In OFF TIMER operation, the FULL lamp is ON
as indicator.
<In NIGHT LAUNDRY mode>
z When the water tank becomes full, the unit
stops dehumidification but the air supply
continues.
Though the FULL lamp lights, there will be no
warning sound. The air supply continues even
if the water tank has been removed.
3
Slide the tank lid to close the tank.
4
Check the tank, and firmly push it
all the way in.
Confirm that the tank lid and the tank guard are
securely attached, and push the tank in with both
hands.
(Sounds "Blip".)
If the tank is not installed correctly, the FULL lamp will
come on, and the unit will not operate.
z Secure the tank lid and tank guard properly or else
the tank may become stuck.
z Do not remove or dismantle the floating element from
the tank. If it is removed, the unit cannot detect the
water level, and this could result in leakage.
Tank
Make sure the
tank is not broken
or cracked.
19
Advertisement
Table of Contents
