Draining; Tank Lid 10·22; Floating Element - Mitsubishi Electric MJ-E152AK-H Instruction Manual

Draining

When the tank is full (approximately 4.7 L), the unit automatically stops and the FULL lamp lights.
Please empty the tank.
When the water tank becomes full, the FULL lamp lights.
1
Remove the water tank.
Slide the tank out
steadily with both hands.
2
Remove the tank lid, and pour
out the water.

Floating Element

Do not remove or
dismantle the floating
element.
22
z FULL lamp lights.
(There will be continuous sounds "bleep bleep bleep".)
z Airflow stops.
(Louvre stops.)
z LCD indicators go out.
Hold the water tank.
Tank Lid
Tank
Guard
3
Slide the tank lid to close the tank.
4
Check the tank, and firmly push it
all the way in.
Pour the
water out
Confirm that the tank lid and the tank guard are
from here.
securely attached, and push the tank in with both
hands.
(Sounds "Blip".)
z If the tank lid and the tank guard are not
z If the water tank is not installed correctly,
z Secure the lid and guard properly or else the tank
z If the tank is not installed correctly, the FULL lamp will
Do not remove or dismantle the floating element from the
tank. If it is removed, the unit cannot detect the water
level, and this could result in leakage.
z After pouring out the water, replace the water tank,
and the FULL lamp will go out. The unit restarts.
z When the FULL lamp is on, other operations
are forbidden except for pressing the POWER
switch.
z In OFF TIMER operation, the FULL lamp is ON
as indicator.
<In NIGHT LAUNDRY mode>
z When the water tank becomes full, the unit
stops dehumidification but the air supply
continues.
Though the FULL lamp lights, there will be no
warning sound. The air supply continues even
if the water tank has been removed.
properly replaced, you may have problems
removing the water tank.
the FULL lamp will light and the unit will not
operate.
may become stuck.
come on, and the unit will not operate.