Table of Contents
Advertisement
Danger due to faulty or insufficient power supply.
This may result in serious injury and damage to property.
▶
Charging lead
Danger due to trailing charging leads.
This may result in serious injury and damage to property. People may become entangled
in or trip over loose, unwound cables
▶
Danger due to the charging plug being pulled out during the charging process.
This may result in serious injury and damage to property. The sparks caused by this can
ignite the charging gases that build up during the charging process, causing a fire or an
explosion.
▶
Correct routing of
the mains/char-
ging cables
Danger due to overheating as a result of incorrectly laid mains/charging cables.
Risk of damage to the components.
▶
▶
▶
▶
▶
▶
WARNING!
The power supply requirements detailed in "Technical data" must be met.
WARNING!
Lay the charging leads so that no one can trip over or become entangled in them.
WARNING!
Once the charging process is complete, wind up the charging leads, or if available,
place them on the cable holder.
CAUTION!
Lay the mains/charging cable without a loop.
Do not cover the mains/charging cable.
Charging cables longer than 5 m (16 ft. 4.85 in.) must be laid individually (no bund-
ling).
For charging cables longer than 5 m (16 ft. 4.85 in.), a maximum ambient temperat-
ure of 30 °C (86 °F) must not be exceeded.
The mains/charging cable may only be replaced by a qualified electrician.
Charging cables longer than 5 m (16 ft. 4.85 in.) can have an increased surface tem-
perature (be aware of hot surfaces).
13
Advertisement
Table of Contents
