Calculated Industries ConcreteCalc User Manual page 6

Dimension Keys
[Yds]
Yards — This is an entry and conver-
sion key. The entry can be a whole
number or a decimal number. Used with
the [Conv] key converts any other dis-
played dimensioned number to yards.
[Feet]
This is an entry and conversion key.
The entry can be a whole number or
decimal number. This key can also be
used in conjunction with the [Inch] and
[ / ] keys for entering values in Feet-
Inch format. For example, 6 feet 9-1/2
inches is entered as follows:
6 [Feet] 9 [Inch] 1 [ / ] 2
Repeated presses of this key during
conversions will toggle between Feet-
Inch and Decimal Feet formats.
[Inch]
This is an entry and conversion key.
The entry can be in whole or decimal
numbers. This key can also be used in
conjunction with the [ / ] key for enter-
ing values in Fractional Inch format.
Repeated presses of this key during
conversions will toggle between Fractional
Inch and Decimal Inch formats.
6 – ConcreteCalc™