Calculated Industries ConcreteCalc User Manual page 11

given an entered cross-sectional footing
area (see [Conv] [Ftg]) and Length.
[Conv] [Ftg]
Cross-sectional Area — Used to perma-
nently set the cross-sectional area for
calculating footings. The default setting
for the cross-sectional area is 1.8 square
feet. To recall the stored cross-section-
al area, press [Rcl] [Ftg].
Stair & Circle Keys
[Stair]
A multi-function key that displays the fol-
lowing values when pressed repeatedly
(using Length and Height values):
# Presses
1
2
3
4
5
6
7
8
When the [Stair] key is preceded by a
linear or undimensioned entry, the
value will be permanently stored as the
Information Displayed
Number of Risers
Riser Height
Riser Overage/Underage
Number of Treads
Actual Tread Width
Tread Overage/Underage
Stringer Length
Inclination Angle
User's Guide – 11