Replacing Fuses; Disposal - AAT CargoMaster C120 V Original User Manual

7.4 Replacing fuses

NOTE - Do not mend nor bridge defective fuses. Replace defective fuses with new 40 A fuses.
i
Replacement fuses are available from the manufacturer.
i
NOTE - If fuses blow frequently: contact the manufacturer or a certified partner.
i
NOTE - Before replacing fuses, remove charger / charging cable for vehicle.
Loosen screw and remove
fuse cover on the battery
pack.

7.5 Disposal

Remove covers and fuses
and, then, insert new 40 A fus-
es.
The product is marked with the crossed out dustbin according to the WEEE
Directive. This marking indicates that these products must be brought to a
regional recycling facility when they have reached the end of their useful
life.
Please check the applicable legislation in your country for the disposal of
this product as the implementation of the WEEE Directive differs in the
respective countries and/or does not apply outside of the EC.
Alternatively, you can also return these products to AAT or the competent
specialized dealers, where they are collected for correct disposal.
Position fuse cover and fix
with screw.
35