Table of Contents
Advertisement
3
Explanation of the symbols on the device (applicable for the EU)
NOTE - All symbols and adhesive labels listed in this chapter can be found on the Cargo Master
i
C120 in the respective national language! The exact position on the device is listed in the de-
scription of the adhesive labels as well as in the following labelling plan.
Symbol
SN
CE marking
Position: Type plate
The product complies with the relevant provisions of the EC Machinery
Directive 2006/42/EC.
SN
Position: Type plate
Serial number of the product (e.g. C120XXXXXXX)
Manufacturer
Position: Type plate
Indicates the manufacturer of the product (AAT Alber Antriebstechnik
GmbH)
Barcode
Position: Type plate
Contains the AAT serial number
Date of manufacture
Position: Type plate
Indicates the year the medical device was manufactured.
TÜV Süd NRTL test mark
Position: Drive unit, left side
Refers to the fact that the product has been tested for state-of-the-art
technology, as well as for electrical and mechanical safety by TÜV
SÜD Product Service GmbH. The NRTL certification provides clear ev-
idence that the product meets the requirements of the North American
market.
Adhesive label on the drive unit (below the membrane keypad)
Observe the user manual!
WARNING: rotating / moving parts!
Operation only by one trained person!
Activate the safety brakes on the stairs and check them before each
use.
Lifting capacity max. 120 kg!
WARNING: Risk of crushing!
May cause injury and/or damage to the device.
Do not step on this surface.
Adhesive label on climbing leg
WARNING: Do not reach in
Serious injuries to hands or fingers possible.
Keep hands away from the climbing leg.
Adhesive label Note - No handle
Position: Front part, back of drive unit
DANGER
Parts in movement
Explanation
9
Advertisement
Table of Contents
