Calculated Industries 4030 User Manual page 28

[Sine] — Sine Function
Computes the sine of a degree or undimensioned* value.
[Conv] [Sine] — Arcsine (sin
Computes the angle for the entered or calculated sine value.
[Cos] — Cosine Function
Computes the cosine of a degree or undimensioned value.
[Conv] [Cos] — Arccosine (cos
Computes the angle for the entered or calculated cosine value.
[Tan] — Tangent Function
Computes the tangent of a degree or undimensioned value.
[Conv] [Tan] — Arctangent (tan
Computes the angle for the entered or calculated tangent value.
R R
*Note: Cannot use on dimensioned values.
26 — CONSTRUCTION MASTER PRO
-1
)
-1
)
-1
)