Ink Low; No Ink Cartridge - Brother MFC-J825DW Basic User's Manual

Error Message
Ink Absorber NearFull

Ink low

Low Temperature
Media Error
Media is Full.
No Caller ID
No File

No Ink Cartridge

Cause
The ink absorber box or flushing box is
nearly full.
One or more of the ink cartridges are
near the end of their life. If a sending
machine has a color fax to send, your
machine's "handshake" will ask that
the fax be sent as black & white. If the
sending machine has the ability to
convert it, the color fax will be printed
at your machine as a black & white
fax.
The print head is too cold.
The memory card is either corrupted,
improperly formatted, or there is a
problem with the memory card.
The memory card or USB Flash
memory drive you are using has no
available space or already contains
999 files.
There is no incoming call history. You
did not receive calls or you have not
subscribed to the Caller ID service
from your telephone company.
The memory card or USB Flash
memory drive in the media drive does
not contain a .JPG file.
An ink cartridge is not installed
properly.
Troubleshooting
Action
The ink absorber box or flushing box
will need to be replaced soon. Call
Brother Customer Service or a Brother
Authorized Service Center to have
your machine serviced. (See Brother
numbers uu page i.)
Order a new ink cartridge. You can
continue printing until the LCD shows
Cannot Print. (See Ordering
accessories and supplies uu page ii
and Replacing the ink cartridges
uu page 61.)
Allow the machine to warm up.
Put the card firmly into the slot again to
make sure it is in the correct position.
If the error remains, check the media
drive (slot) of the machine by putting in
another memory card that you know is
working.
Your machine can only save to your
memory card or USB Flash memory
drive if it contains less than 999 files.
Delete unused files to free some
space and try again.
If you want to use the Caller ID feature
call your telephone company.
(uuAdvanced User's Guide: Caller
ID)
Put the correct memory card or USB
Flash memory drive into the slot again.
Take out the new ink cartridge and
re-install it slowly until it clicks.
(See Replacing the ink cartridges
uu page 61.)
B
71