Status Led; Basic Operations - Brother MFC-J825DW Basic User's Manual

Status LED

When you turn the machine on, the status
LED lights up.
When the memory card or USB Flash
memory drive is being read or written to, the
status LED blinks.
When the machine is in Sleep Mode, the
status LED will be off.

Basic Operations

To operate the Touchscreen use your finger
to press the Menu or option button directly on
the Touchscreen. To display and access all
the screen menus or options in a setting,
press d c or a b to scroll through them.
IMPORTANT
DO NOT press the Touchscreen with a
sharp object, such as a pen or stylus. It
may damage the machine.
The following steps show how to change a
setting in the machine. In this example the
Receive mode setting is changed from
Fax Only to Fax/Tel.
a
Press Menu.
b
Press a or b to display
1
Initial Setup.
c
Press Initial Setup.
d
Press a or b to display Receive Mode.
e
Press Receive Mode.
f
Press Fax/Tel.
1
Note
Press to go back to the previous
level.
g
Press Stop/Exit.
General information
9
1