How To Charge / Comment Charger - Segway Ninebot Urban A200 User Manual

5 Lock the E-bike
Wrap the lock cable around a fixture and then insert the lock head into the lock hole to secure the
E-bike. After locking, if there is abnormal movement, when the bike falls or crashes, a continuous alarm
will start.
WARNING / AVERTISSEMENT
DO NOT touch the hub motor after
riding because it can get hot.
NE touchez PAS le moteur du moyeu après
rouler car il peut faire chaud.
08

4 How to Charge / Comment charger

Charge the E-bike
Lock hole
Plug the charger output into the charging port, and then connect to a power outlet. Remember to unplug
from the power outlet once fully charged.
Your bike is fully charged when the charger indicator turns green.
Charge the Battery
Open the battery compartment via your app. Pull off the battery plug and take out the battery. Connect
the charger output to the battery charging port, and then plug into a power outlet. Place the battery
back in and close the battery compartment when finished.
Charging port Charging steps:
Open the charge
port cover.
Insert the Close the charge
charge plug. port cover when
finished.
Battery charging port
09