Chicago Pneumatic CP 0044 Safety And Operating Instructions Manual page 11

CP 0044
Maintenance, precautions
WARNING Machine modification
Any machine modification may result in body injuries
to yourself or others.
Never modify the machine. Modified machines
►
are not covered by warranty or product liability.
Always use original parts and accessories.
►
Change damaged parts immediately.
►
Replace worn components in good time.
►
WARNING Cutting blade hazards
Accidental engagement of the start and stop device
during maintenance or installation can cause serious
injuries, when the power source is connected.
► Never inspect, clean, install, or remove the cutting
blade while the power source is connected.
Storage, precautions
The cutting blade must be removed from the
♦
machine after use and stored carefully. Store
cutting blades in dry, frost free conditions.
Special care must be taken with abrasive cutting
♦
blades. Abrasive cutting blades must be stored
on a flat, level surface. If an abrasive cutting blade
is stored in humid conditions, it can cause
imbalance.
Always inspect new cutting blades for transport
♦
or storage damage.
Keep the machine and tools in a safe place, out
♦
of the reach of children and locked up.
9800 0543 90b | Original instructions
Safety and operating instructions
11