Advertisement
PROGRAMMING INSTRUCTIONS
ADDING A CHANNEL
MULTI-CHANNEL REMOTE
1.
Select the desired channel
2. Using a paperclip or
you wish to duplicate by
pen, press and hold the
PROGRAM
momentarily pressing the
CHANNEL SELECTOR
the remote until the
button on the multichannel
blind jogs once.
remote.
PROGRAM
BUTTON
CHANNEL
CHANNEL
INDICATOR
SELECTOR
DELETING A CHANNEL
MULTI-CHANNEL REMOTE
1.
Using a paperclip or
2. On the remote select the
pen, press and hold the
desired channel to be
PROGRAM
button on the
deleted.
remote until the blind
jogs once.
PROGRAM
BUTTON
CHANNEL
INDICATOR
Somfy Motor RTS manual 25_02.indd 8-9
3. Ensuring you are on the new
channel press the
PROGRAM
button on the remote until the
button on
blind jogs once. The additional
(new) channel is now added to
the motor memory and can be
used to operate the blind.
PROGRAM
BUTTON
3. Press the
PROGRAM
button
on the remote until the blind
jogs once. The channel is
now deleted from the motor
memory and will not operate
PROGRAM
BUTTON
CHANNEL
SELECTOR
PROGRAMMING INSTRUCTIONS
Note: Should your blind run in the opposite direction to the remote instruction
follow the below steps to correct.
ADJUSTING THE MOTOR ROTATION DIRECTION
1.
Press the
UP
or
2. Press and hold
DOWN
button
the
UP
and
on the remote to
DOWN
buttons
move the blind
simultaneously until
away from the end
the blind jogs.
limits.
ADJUSTING UPPER LIMIT
Note: Blind limits will be pre-set on arrival
1.
Briefly press the
UP
2. Press and hold the
UP
DOWN
button. The blind
and
will move to pre-set
button until the
upper limit.
blind jogs.
3. Press and hold the
4. Press the
UP
button
MY
(Stop) button
to check the new
until the blind jogs,
rotation direction.
the rotation direction
is now reversed.
3. Press and hold
4. To confirm the
UP
DOWN
the
or
new position press
button to move the
and hold the
MY
blind to the desired
(Stop) button until
upper position.
the blind jogs. The
new upper limit is
now added to the
memory.
04/03/2020 14:25
Advertisement
