Faxing From The Scanner Glass - Brother MFC 9600 Owner's Manual

Faxing from the Scanner Glass

You can use the scanner glass to fax one page at a time or pages of a book.
Originals can be letter or A4 size (8.5 inches to 11.7 inches).
To use the scanner glass, the ADF must be empty.
1
Lift the document cover.
2
Using the document guidelines on the left, center the original face down
on the scanner glass.
3
Close the document cover.
If the original is a book or is thick, do not slam the cover or press on it.
4
Dial the fax number, then press
The MFC starts scanning the first page.
5
To send a single page, go to Step 7—OR—
To send multiple pages, go to
Step 6.
6
Place the next page on the scanner
glass and press
additional page.)
7
Press to begin dialing.
Start
Press to cancel. If the origianl was scanned into memory, press
Stop
CLEAR it—OR—
If memory is full, and you are faxing a single page, it will be sent in real
time.
You cannot fax from the scanner glass when the MFC is sending,
receiving or printing a fax.
Start
. The MFC starts scanning. (Repeat Step 6 for each
Set
2 to EXIT.
Originals are
Face Down
on the Scanner
Glass
.
MEMORY #01 100%
SET:NEXT PAGE
START:TO DIAL
S E T U P S E N D
to
1
6 - 3