Table of Contents
Advertisement
Document Type
You can select the Copy resolution for your type of original. The default
setting is AUTO, which is used for documents that contain both text and
photographs. TEXT is used for documents containing only text. PHOTO is
used for copying photographs.
1
Insert the original in the ADF or on
the scanner glass.
2
Press
Document Type
3
Press
or
4
Press
.
Copy
5
Using the dial key pad, enter the number of copies.
6
Wait five seconds—OR—Press
Enlarged or Reduced Copies
1
Place the original in the ADF or on the scanner glass.
2
Press
Enlarge/Reduce
3
Press
or
or reduction ratio.
You can reduce to AUTO, 93%, 87%, 75%, 50%, or 25% of the original
size
—OR—
You can enlarge to 120%, 125%, 141%, 150%, 200%, or 400%
—OR—
For more choices select ZOOM and press
any percentage between 25% and 400%.
For example, press
4
Press
.
Copy
5
Using the dial pad, enter the number of copies.
6
Wait five seconds—OR—Press
Select AUTO if you want the MFC automatically to reduce the original to
fit on the paper size you programmed (Function 1-2-6).
10 - 4
C O P Y O P E R A T I O N S
.
to choose document type and press
Copy
.
to choose an enlargement
,
to enter 53%.
5
3
Copy
DOC TYPE:AUTO?
SELECT < - - > & SET
.
Set
again.
ELG/RDC:100%
SELECT
. Use the dial pad to enter
Set
again.
& SET
Advertisement
Table of Contents
