Using The Remote Printer Console Main Program - Brother MFC 9600 Owner's Manual

Using the Remote Printer Console Main Program

Type C:\RPCX>RPCX and press the Enter key to start the Remote Printer
Console main program.
The Main Screen will appear on your computer screen as shown below.
Direct_Access
[Alt+Character] Menu
If bi-directional communication is enabled between your computer and
MFC when it starts, the RPC gets the current settings information from
your MFC. Otherwise, RPC shows its default settings. If you want to
change settings, move the cursor to the item you want and select it using
the Enter and Cursor keys. Then, press the Enter key to make the
selected settings valid.
There are four sub menus. (See table below.) Select the sub menu you
want by clicking on it with the mouse, using the cursor keys and the
Enter key, or by pressing the hot key commands for that sub menu.
Menu Press the keys
Direct Alt + D
Access
Printer Alt + P
Setup
Console Alt + C
Config
Guide Alt + G
Help F1
Remote Printer Console
Printer_Setup Console_Config
Current Status
Status Ready
Media Type Regular
Paper feed Paper Cassette
Emulation Laser Jet IIP
Paper Size Letter
Orientation Portrait
Quality Normal
Copies 1
Memory size 2138112 Byte
[ /¬] Select [Enter] Setting
[F1] Help [ESC] Exit
Functions
You can directly control the Brother
machine, with Print Form, Reset Printer.
You can enter the setting mode to change
other printer settings, such as, margin
settings, continue mode, font and sleep
mode.
You can change the environment settings
for the RPC program: color, Status
Monitor configuration, etc.
You can go to the Guide mode.
You can get Online Help: If you press F1,
you can get information on a highlighted
item.
F O R D O S U S E R S
Guide
13 - 3