Troubleshooting - Neue NDIH 1L949-80 User Manual

Many occuring problems could be solved by yourself without specific expertise. In
case of a problem please check all shown possibilities and follow below instructions
before you contact an after sales service.
CAUTION
Before maintenance, deactivate the appliance and disconnect the mains plug from
●
the mains socket.
Electrical equipment should be serviced only by qualified electrical experts,
●
because improper repairs can cause considerable consequential damages.
The appliance does not start, or it stops during operation or Indicator is lighted
Problem
The programme
does not start.
Rinse Aid Indicator
is lighted.
Salt Aid Indicator
is lighted.
Possible cause
Appliance door is open.
Delay start is set.
Mains plug is not connected
in the mains socket.
Fuse in the house circuit is
damaged.
Rinse aid dispenser is empty. Refill Rinse aid until full.
Refill of rinse aid was not
confirmed.
Softener salt is empty.
Refill of salt was not
confirmed.

Troubleshooting

Possible solution
Close the appliance door.
Refer to displayed time.
Connect the mains plug.
Replace the fuse.
Press button for 3 sec
after each refill.
Fill the tank up with specific
salt until full.
Press button for 3 sec
after each refill.
39