Before First Use - Neue NDIH 1L949-80 User Manual

How to Adjust User Preference Settings
During the selection of programmes, press and hold
the user preference settings. User preference settings include Water Softener
setting,Buzzer setting,Rinse Aid setting and Memo Mode setting.
1.The appliance is switched on.
2. Press and hold the
flash for 1s and then turn off. If you want to adjust the water softener, press
to scroll the setting between S1 and S6 (the default is S4) as the table below:
P1
OFF
ON
ON
ON
ON
ON
► If you want to activate/de-activate the buzzer, Press
On (LED on) or Buzzer OFF (LED off).
► If you want to change the Rinse AId setting, press
steps between R1 ( minimum dispense) and R4 ( maximum dispense).
The LED displays as follows:
3h 6h
OFF
OFF
OFF
ON
ON ON
ON ON
► If you want to Turn On/Turn Off the Memo Mode, press
6h
OFF
ON
3.Press and hold the
for 5S to enter the user setting mode, and all LEDs will
P2 P3
OFF OFF
OFF
OFF
ON
OFF
ON
ON
ON
ON
ON ON
9h Rx level
R1 Empty
OFF
R2 3ml
OFF
R3 5ml default
OFF
ON
R4 6ml
Memo mold
OFF default
ON
for 3S to save the setting and exit the setting mode.
for about 5 seconds to enter
P4 Zoom
OFF
OFF
OFF
OFF
OFF
OFF
OFF OFF
OFF
ON
ON ON

Before first Use

Sx level
S1
S2
S3
S4 default
S5
S6
to toggle Buzzer
to change the setting in
as follows:
33