Neue NDIH 1L949-80 User Manual page 19

Installation instructions
Dishwasher using drain hose joiner
onto sink trap/waste tee
If space is limited
for fixing, push
hose through drain
hose support
to required height
Ensure drain hose is routed
straight to joiner. Remove
drain hose material if necessary.
Do not shorten the inlet hose.
2
1
excess
Installer to provide
drain hose joiner to suit
min. 15mm waste tee
step 9
min. radius
200 mm
IMPORTANT!
Do not connect the drain hoses
to a Waste Disposal Unit, as this
type of connection may lead to a
blockage in the drain hoses.
3
17