Table of Contents
Advertisement
6
Plinth installation
Separate panel
153
100
30
Fix brackets to panel using Ø3.5 x
13mm screws. Insert plinth into product
and mark the desired alignment depth
on the bracket. Remove panel. Using a
screwdriver, bend the marked tabs out
on both brackets to prevent plinth from
receding into product further.
12
A
65
plinth depth range
Installation instructions
180.9
A
1
Mark out the pilot hole locations for
each bracket. To establish the height in
which the bracket will be fixed, measure
the distance from the floor to the lowest
hole of the bracket. Remove bracket
from the product and plot the location of
the
other
holes
measurement. Note door overhang and
swing range.
2
4
Slide plinth firmly into the
spaces on either side of
the chasis to attach.
Centre
relative
to
this
3
Hide quick links:
Advertisement
Table of Contents
