Installation instructions
10
Plug product in
Electrical connection
The dishwasher must not be connected to the electrical supply while installation is
●
being carried out. Ensure all domestic wiring is properly earthed.
Check the rating label (located on the left-hand side of the dishwasher's stainless
●
steel inner door) and ensure that the voltage and frequency values for the current
in the house correspond to those on the rating label.
Insert the plug into a properly earthed power outlet that has a disconnection switch.
●
IMPORTANT!
The earthing of the appliance is a safety requirement mandated by law.
●
If the power cord is not long enough to reach the outlet or the outlet to which the
●
appliance must be connected is not appropriate for the plug, the entire dishwasher
power cord must be replaced. This should only be done by a Haier authorised technician.
Do not modify or cut the plug. Do not use an adaptor, extension cord, or multi-outlet
power board to connect the dishwasher to the power supply, as these could cause
overheating and create a fire hazard.
The outlet into which the dishwasher is plugged must remain easily accessible(e.g.
●
in an adjacent cabinet) even when the appliance is installed. This is to ensure that the
dishwasher can be disconnected from the power supply for safe cleaning and
maintenance.
19