Neue NDIH 1L949-80 User Manual page 15

Installation instructions
Continuous panel
153
100
30
2
Align the plinth to desired position and
mark out the point in which the plinth
meets the base of the door panel. Cut
back excess.
A
65
plinth depth range
1
Note door overhang and swing range
relative to height and depth of plinth
panel. As the panel is continuous,
cutting back panel is likely to be
necessary to ensure
integration.
IMPORTANT!
Plinth can protrude no more than 90mm
out from the dishwasher to ensure that
the visibility of the floor light is not
obstructed.
3
Fit continuous panel to
surrounding cabinetry
seamless
13