Before First Use - Neue IDSH603W User Manual

Before first use

1. Make sure that the current level of the water
softener agrees with the hardness of the water
supply. If not, adjust the level of the water
softener.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Start a programme to remove any processing
residuals that can still be inside the appliance. Do
not use detergent and do not load the baskets.
When you start a programme, the appliance can take up
to 5 minutes to recharge the resin in the water softener.
It seems that the appliance is not working. The washing
phase starts only after this procedure is completed. The
procedure will be repeated periodically.
The salt container
Caution! Only use salt specifically
designed for dishwashers.
The salt is used to recharge the resin in the water
softener and to assure good washing results in the daily
use.
How to fill the salt container
1. Turn the cap of the salt container counterclockwise
and remove it.
2. Put 1 litre of water in the salt container (Only for the
first time).
3. Fill the salt container with dishwasher salt.
4. Remove the salt around the opening of the salt
container.
8
5. Turn the cap of the salt container clockwise to
close the salt container.
Water and salt can come out from the
salt container when you fill it. Risk of
corrosion. To prevent it, after you fill the
salt container, start a programme.
How to fill the rinse aid dispenser
30
20
A
A
-
B
Caution! Only use rinse aid specifically
designed for dishwashers.
1. Turn the cup (C) counterclockwise to open the
dispenser.
2. Press the release button (D) to open the lid (C).
3. Pour the rinse aid in the dispenser (A) until the
liquid reaches the fill level 'max'.
4. Remove the spilled rinse aid with an absorbent
cloth to prevent too much foam.
5. Put the cap in position and turn it clockwise to close
the dispenser.
6. Close the lid. Make sure that the release button
locks into position.
A B E
A
+ -
C
D
C D
+