Before First Use - Neue IDSH451W User Manual

How to deactivate the acoustic signals
1. Press the on/off button to activate the appliance.
Make sure that the appliance is in setting mode, re-
fer to "Setting and starting a programme".
2. Press and hold the programme button until the indi-
cator
comes on.
3. Press immediately the programme button.
• The indicator
fixed light.
• The indicator
4. Wait until the indicator
the end indicator comes on (the indicator
continues to flash).
• The acoustic signals are on.

Before first use

1. Make sure that the set level of the water softener
agrees with the water hardness in your area. If not,
adjust the water softener. Contact your local water
authority to know the water hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
Adjusting the water softener
German
degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
flashes and the indicator
comes on with a
starts to flash.
goes off and
Water hardness
French mmol/l
degrees
(°fH)
84 - 90 8.4. - 9.0
76 - 83 7.6 - 8.3
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
5. Press the programme button. The end indicator
goes off.
• The acoustic signals are off.
6. Press the on/off button to deactivate the appliance
and to confirm the setting.
How to activate again the acoustic signals
1. Refer to 'How to deactivate the acoustic signals'
and follow the procedure from step (1) to step (5).
The end indicator is off.
2. Press the programme button. The end indicator
comes on.
• The acoustic signals are on.
3. Press the on/off button to deactivate the appliance
and to confirm the setting.
4. Open the water tap.
5. Processing residues can stay in the appliance. Start
a programme to remove them. Do not use detergent
and do not load the baskets.
Clarke
degrees
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
Water softener
adjustment
Level
10
9
8
7
6
1)
5
4
3
2
5