Operating The System - Philips FW-V28 Manual

All manuals and user guides at all-guides.com
CONTROLS
§ OSD (ON SCREEN DISPLAY)
– to switch on or off the on screen
display on the TV screen.
≥ INCREDIBLE SURROUND (not
applicable for this model) .
– to switch on or off the surround sound
effect.
• ZOOM
– to enlarge a still picture on the TV
screen (for VCD operation only) .
ª VOCAL
– to fade out the vocal of the original
song during VCD playback or to switch
between mono or stereo mode during
audio disc playback (for VCD operation
only) .
º KEY CONTROL ( I È i )
– to change the key to suit your vocal
range (for VCD operation only) .
I ................. to decrease vocal key
level.
È .................... to restore vocal key to
original setting.
i ................... to increase vocal key
level.
⁄ ECHO -/+
– to adjust the echo level for karaoke
(for VCD operation only) .
¤ RESUME
– to continue playback again from
where you have stopped. Only when
PBC mode is switched off (for VCD
operation only) .
10
Untitled-1 10
‹ SLOW
– to watch a VCD at a slower speed.
There are 3 modes of selection (for
VCD operation only) .
STANDBY-ON
› A - B
– to playback a certain scene or passage
of a disc repeatedly.
fi DIGEST
– to scan through a VCD or a particular
track. There are 4 modes of selection
(for VCD operation only) .
fl MUTE
– to switch off the sound temporarily.
‡ DIGIT 0 – 9
(numbers consisting of two figures
Important:
must be keyed in within 2 seconds.)
Before you operate the system,
for VCD with PBC on ..........................
complete the preparation procedures.
to select an entry level.
for VCD/CD...to key in a disc track to
start playback or Demonstration mode
...................... to select another track
The system has a demonstration mode that
during playback or
shows the various features offered by the
...................... to select a track for
system. When the system is switched
programming.
on for the first time, the demonstration
° B
mode will start automatically.
– to switch the system to standby mode.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
Notes for remote control:
system will switch to the respective
– First select the source you wish to
mode (or standby).
control by pressing one of the
– When the system is switched to standby
source select keys on the remote
mode, the demonstration will resume 5
control (e.g. VCD, TUNER, etc.).
seconds later.
– Then select the desired function
( É , í , ë , etc.).

OPERATING THE SYSTEM

3 CD ROTARY CHANGER SYSTEM
CD REWRITABLE COMPATIBLE
CD SYNCHRO RECORDING
VCD MINI HIFI SYSTEM
CD1 • 2 • 3 BAND TAPE 1 • 2 VIDEO
VCD TUNER TAPE AUX
PAL/NTSC
TUNING PRESET
SEARCH STOP• CLEAR PLAY• PAUSE PREV NEXT
DIGITAL
DSC
SOUND
CONTROL PROGRAM RECORD DUBBING A.REPLAY DIM
MICROPHONE - LEVEL
PBC
RETURN CLOCK•TIMER
VOLUME
To stop the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– Even though the AC power cord is
removed from and reconnected to the
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
31/05/2001, 11:35 AM
•
•
•
3139 116 20021