Philips FW-V28 Manual page 7

Mini hi-fi system
Hide thumbs Also See for FW-V28:
Table of Contents

Advertisement

All manuals and user guides at all-guides.com
A AM Loop Antenna
Connection
Connect the supplied loop antenna to the
AM ANTENNA terminal. Place the AM loop
antenna far away from the system and
adjust its position for the best reception.
B FM Wire Antenna
Connection
Connect the supplied FM wire antenna to
the FM AERIAL (FM ANTENNA) 75 Ω
terminal. Adjust the position of the FM
antenna for the best reception.
Outdoor Antenna
For better FM stereo reception, connect an
outdoor FM antenna to the FM AERIAL (FM
ANTENNA) 75 Ω terminal using a 75 Ω
coaxial wire.
FM AERIAL 75Ω
FM ANTENNA 75Ω
OR
Untitled-1
7
C Speakers Connection
D Connecting other
• Connect the right speaker to Front
terminal R, with the colored wire to +
You can connect the audio left and right
and the black wire to -.
OUT terminals of a TV, VCR, Laser Disc
• Connect the left speaker to Front
player, DVD player or CD Recorder to the
terminal L, with the colored wire to +
AUX IN terminals at the rear of the system.
and the black wire to -.
• Clip the stripped portion of the speaker
E Video Out Connection
wire as shown.
Connect the VIDEO OUT terminal at the
rear of the system to the TV or VCR VIDEO
IN for viewing or recording.
12 mm
F Adjusting the Operating
unlock
lock
CAUTION:
– For optimal sound performance, it is
Before connecting the AC power cord to
recommended to use the supplied
the wall outlet, make sure that the voltage
speakers.
selector at the rear of the system is set to
– Do not connect more than one speaker
the local power line voltage. If not, reset
to any one pair of + / - speaker
the selector before connecting to the wall
terminal.
outlet.
– Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to
SPECIFICATION section of this manual.
G AC Power Supply
equipment to your system
After all other connections have been
made, connect the AC power cord to the
system and to the wall outlet.
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or AA)
into the remote control as shown in the
battery compartment.
Voltage
(for specific version only))
• To avoid damage from possible battery
leakage, remove dead batteries or
batteries that will not be used for a long
time. For replacement, use type R06 or
AA batteries.
31/05/2001, 11:35 AM
PREPARATION
7
3139 116 20021

Advertisement

Table of Contents
loading

Table of Contents