Operating The System - Philips FW-C70 Manual

12
MINI HIFI SYSTEM
PROGRAM SHUFFLE
REPEAT TIMER REC
NEWS T.A. AM MW FM LW
60Hz 250Hz
500Hz 1KHz
STANDBY
ON
CLOCK/
C D 1 • 2 • 3 FM • AM TAPE 1 • 2
TIMER
CD TUNER
PROG
SEARCH • TUNING STOP • CLEAR PLAY PAUSE
UP
SOUND SOUND NAVIGATION
DIGITAL SOUND
DOWN
CONTROL
Important:
Before you operate the system,
complete the preparation
procedures.
Demonstration mode
The system has a demonstration mode
that shows the various features offered
by the system. When the system is
switched on for the first time, the
demonstration mode will start
automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to
standby mode, the demonstration will
resume five seconds later.
pg 01-28/C50-C70/37-Eng 12

OPERATING THE SYSTEM

– Even though the AC power cord is
removed from and reconnected to the
C wall socket, the demonstration will
STEREO
BACK
FRONT HSD
L R
4KHz 8KHz remain off until it is switched on again.
2KHz
PRO LOGIC
DOLBY B
S S
NR
RDS
To start the demonstration mode
NEWS!
VIDEO
• Press and hold Ç(on the system
TAPE AUX
only) for five seconds when the
PRESET
PREV NEXT
system is in standby mode.
™ The demonstration will begin.
VOLUME
DYNAMIC BASS
BOOST
Easy Set
EASY SET allows you to store all
available radio stations automatically.
To stop the demonstration mode
• Press and hold STANDBY ON (on
• Press and hold Ç(on the system
the system only) for five seconds
only) for five seconds when the
when the system is in standby or
system is in demonstration mode.
demonstration mode.
™ The demonstration will stop.
™ "EASY SET" will be displayed,
™ "DEMO OFF" is displayed.
and followed by "TUNER" and
™ The system will switch to standby
then "AUTO".
mode.
™ EASY SET will start searching for
™ (for model FW-C70 only)
all radio stations on FM band and
About five seconds later, the
then followed by radio stations on
system will go into an energy
AM band.
saving mode ( < 2 watts ). The
™ All available radio stations with
low power STANDBY ON LED
sufficient signal strength will be
will be lit.
stored. Up to 40 presets may be
stored.
Notes:
– When the system is switched on from
Notes:
the main power outlet, the CD carousel
– EASY SET will start with the FM band,
tray may open and close again to
if there are still presets available, the
initialize the set.
system will continue to store the AM
band.
Get other manuals https://www.bkmanuals.com
– When EASY SET is used, all previously
stored radio stations will be replaced.
– The last preset radio station will
appear on the display when EASY SET
is completed.
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT
PLAY buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on
the remote control.
™ The system will switch to standby
mode.
™ (for model FW-C70 only)
About five seconds later, the
system will go into an energy
saving mode if the demonstration
mode has been disabled.
3139 116 19441 (ENG)
18/11/1999, 2:38 PM