Operating The System - Philips FW-C39 Manual

All manuals and user guides at all-guides.com

OPERATING THE SYSTEM

FW- C10 MINI HIFI SYSTEM
STANDBY-ON
JOG
CD1 • 2 • 3 BAND
CONTROL
CD TUNER
TUNING
SEARCH STOP• CLEAR
PROGRAM RECORD DUBBING A.REPLAY
SOUND NAVIGATION - JOG
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
10
pg 01-24/C38-39/21&/30-En 10
3 CD ROTARY CHANGER SYSTEM •
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
Easy Set
EASY SET allows you to store all available
radio stations automatically.
• Press and hold STANDBY ON (on the
TAPE 1 • 2 CDR/VIDEO
TAPE AUX
PRESET
PLAY• PAUSE PREV NEXT
INCREDIBLE
DIM SURROUND
•
CLOCK TIMER
VOLUME
To stop the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
demonstration mode.
Notes:
™ The demonstration will stop.
– EASY SET will start with the FM band, if
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
Note:
– When EASY SET is used, all previously
– Even though the AC power cord is
removed from and reconnected to the
– The last preset radio station will appear
wall socket, the demonstration will
remain off until it is switched on again.
To start the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
system only) for 5 seconds when the buttons.
system is in standby or demonstration
mode.
Switching the system to
™ "EASY SET" will be displayed, and
standby mode
followed by "TUNER" and then
• Press STANDBY ON or B on the
"AUTO".
remote control.
™ EASY SET will start searching for all
™ The system will switch to standby
radio on FM band and then followed
mode.
by radio stations on MW band.
™ All available radio stations with
sufficient signal strength will be Selecting the Source
stored. Up to 40 presets may be
• Press the respective source selection
stored.
button: CD, TUNER, TAPE or AUX.
™ The display indicates the selected
source.
there are still presets available, the
Note:
system will continue to store the MW
– For an external source, make sure you
band.
have connected the audio left and right
OUT terminals of the external
stored radio stations will be replaced.
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX
on the display when EASY SET is
IN terminals.
completed.
3/3/00, 4:24 PM
3139 116 19401