Tuner - Philips FW-V28 Manual

All manuals and user guides at all-guides.com
VCD MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3 BAND
VCD

TUNER

PAL/NTSC
TUNING
SEARCH STOP• CLEAR
DIGITAL
DSC SOUND
PROGRAM RECORD DUBBING A.REPLAY
CONTROL
MICROPHONE - LEVEL
Note:
– For 'EASY SET' feature, please refer to
page 11.
Tuning to radio stations
1 Press TUNER (BAND) to select TUNER
mode.
™ "TUNER" will be displayed.
A few seconds later, the current radio
frequency will be displayed.
2 Press TUNER (BAND) again to select
the desired waveband : FM or MW.
3 Press à or á for more than one
second, then release.
™ The display will show "SEARCH"
until a radio station with sufficient
signal strength is found.
Untitled-1 17
Storing Preset Stations
You can store up to 40 radio stations in the
memory. When a preset radio station is
selected, the preset number appears next
to the frequency on the display.
TAPE 1 • 2 VIDEO
TAPE AUX
Automatic programming
PRESET
1 Press TUNER (BAND).
2 Press PROGRAM for more than one
PLAY• PAUSE PREV NEXT
DIM
PBC
RETURN CLOCK•TIMER
VOLUME
• Repeat this procedure until the desired
station is reached.
• To tune to a weak station, briefly press
à or á repeatedly until the display
shows the desired frequency and/or
when the best reception has been
obtained.
Notes:
– You can cancel the automatic
programming by pressing PROGRAM or
Ç (on the system only).
– If you want to reserve a section of
preset numbers, for example preset
numbers 1 to 9, select preset 10 before
starting automatic programming, only
the preset numbers 10 to 40 will be
programmed.
second.
™ The PROG flag starts flashing and
Manual programming
"AUTO" will be displayed.
1 Press TUNER (BAND).
™ The system will search for every
2 Press TUNER (BAND) again to select
available station in the FM waveband
the desired waveband : FM or MW.
first, then search the MW waveband.
3 Press PROGRAM for less than one
™ All available stations will be stored
second.
automatically. The frequency and
™ The PROG flag starts flashing.
preset number will be displayed
™ The next available preset number will
briefly.
be displayed for selection.
™ The system will stop searching when
4 Press à or á to tune to the desired
all the available radio stations are
frequency.
stored or when the memory for 40
• If you wish to store the radio station to
preset radio stations is used.
another preset number, press 4 or 3 to
™ The system will remain tuned to the
select the desired preset number.
last stored preset radio station.
5 Press PROGRAM again.
™ The PROG flag disappears and the
radio station will be stored.
• Repeat steps 3 – 5 to store other preset
radio stations.
31/05/2001, 11:35 AM
TUNER
17
3139 116 20021