Operating The System - Philips FW-C10 Manual

All manuals and user guides at all-guides.com

OPERATING THE SYSTEM

FW- C10 MINI HIFI SYSTEM
STANDBY-ON
CD1 • 2 • 3 BAND
CD TUNER
TUNING
SEARCH STOP• CLEAR
DIGITAL
DSC
SOUND
PROGRAM CLOCK•TIMER
CONTROL
DIGITAL SOUND CONTROL
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
10
pg 01-22/C10/22-Eng 10
•
3 CD ROTARY CHANGER SYSTEM
•
CD REWRITABLE COMPATIBLE
•
CD SYNCHRO RECORDING
Easy Set
EASY SET allows you to store all available
radio stations (FM, MW or LW)
automatically.
TAPE 1 • 2 VIDEO MASTER • Press and hold STANDBY ON (on the
VOLUME
TAPE
AUX
system only) for 5 seconds when the
PRESET
system is in standby or demonstration
mode.
PLAY• PAUSE PREV NEXT
™ "EASY SET" will be displayed, and
DIM
™ EASY SET will start searching for all
To stop the demonstration mode
• Press and hold Ç (on the system only)
™ All available radio stations with
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
Notes:
™ The system will switch to standby
– EASY SET will start with the FM band, if
mode.
there are still presets available, the
Note:
system will continue to store the MW
– Even though the AC power cord is
and LW bands respectively.
removed from and reconnected to the
– When EASY SET is used, all previously
wall socket, the demonstration will
stored radio stations will be replaced.
remain off until it is switched on again.
– The last preset radio station will appear
on the display when EASY SET is
To start the demonstration mode
completed.
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
standby mode.
™ The demonstration will begin.
Switching the system ON
• Press CD, TUNER, TAPE or AUX.
You can also switch on the system by
pressing any one of the CD DIRECT PLAY
buttons.
Switching the system to
standby mode
• Press STANDBY ON or B on the
followed by "TUNER" and then
remote control.
"AUTO".
™ The system will switch to standby
mode.
radio on FM band and then followed
by radio stations on MW and LW
bands. Selecting the Source
• Press the respective source selection
sufficient signal strength will be
button: CD, TUNER, TAPE or AUX.
stored. Up to 40 presets may be
™ The display indicates the selected
stored.
source.
Note:
– For an external source, make sure you
have connected the audio left and right
OUT terminals of the external
equipment (TV, VCR, Laser Disc player,
DVD player or CD Recorder) to the AUX
IN terminals.
3/7/00, 5:05 PM
3139 116 19311