Timer - Philips FW-V28 Manual

All manuals and user guides at all-guides.com
5 Press CLOCK•TIMER again to store the
setting.
™ The clock starts.
• To exit without storing the setting, press
Ç on the system.
Notes:
– During clock setting, if no button is
pressed within 90 seconds, the system
will exit clock setting mode
automatically.
– When a power interruption occurs, the
clock setting is erased.
Timer Setting
• The system can switch on to VCD,
TUNER or TAPE 2 mode automatically at
a preset time. It can serve as an alarm
to wake you up.
• Before setting the timer, make sure the
clock is set correctly.
• The timer will always be switched on
once it is set.
• The volume of the timer will
increase from the minimum level
until the volume level before the set
is switched to standby mode.
Untitled-1 23
1 Press and hold CLOCK•TIMER for more – If the source selected is TUNER, the last
than 2 seconds to select timer mode. tuned frequency will be switched on.
™ "12:00 " or "00:00" or the last – If the source selected is VCD, playback
AM
timer setting starts flashing will begin with the first track of the disc
tray 1 or other trays if disc tray 1 is
depending on whether you have
empty. If all the disc trays are empty, the
selected 12- or 24-hour mode.
™ The TIMER flag starts flashing. TUNER will be selected instead.
™ The selected source is lit while other – The timer will not activate if a recording
available sources are flashing. is in progress.
2 Press VCD, TUNER or TAPE to select
the desired source. To switch off the TIMER
• Before selecting VCD or TAPE, make 1 Press and hold CLOCK•TIMER for more
sure a disc or tape is loaded in the disc than 2 seconds .
2 Press Ç on the system to cancel the
tray or tape deck 2.
3 Press à or á on the system to set

timer.

the hour for the timer to start. ™ The timer is now switched off.
4 Press í or ë on the system to set the
™ The display will show "CANCEL"
minute for the timer to start.
5 Press CLOCK•TIMER to store the start
time. To start the TIMER again (for the same
™ The timer is now set. preset time and source)
™ The TIMER flag remains on the 1 Press and hold CLOCK•TIMER for more
display. than 2 seconds .
• At the preset time, the timer will be 2 Press CLOCK•TIMER again to store the
activated. start time.
™ The selected source will be played. ™ The timer is now on.
™ The TIMER flag appears on the
Notes:
– During timer setting, if no button is
pressed within 90 seconds, the system
will exit timer setting mode
automatically.
and the TIMER flag disappears.
display.
31/05/2001, 11:35 AM
TIMER
23
3139 116 20021