Clock - Philips FW-V28 Manual

All manuals and user guides at all-guides.com
RECORDING
Note:
– During recording, it is not possible to
listen to another source.
Dubbing tapes
(from tape deck 1 to
tape deck 2)
1 Press TAPE ( TAPE 1•2 ) to select tape
deck 2.
2 Load the prerecorded tape into tape
deck 1 and a blank tape into tape deck 2
with full spool to the left.
3 Press DUBBING
™ "DUB" with "2" scrolling right will be
displayed.
• Dubbing will start immediately.
™ The REC flag starts flashing.
4 Press Ç to stop dubbing.
Notes:
– At the end of side A, flip the tapes to
side B and repeat the procedure.
– Dubbing of tapes is only possible from
tape deck 1 to tape deck 2.
– To ensure good dubbing, use tapes of
the same length.
– You can listen to other source while
dubbing.
22
Untitled-1 22

CLOCK

VCD/CD Synchro Start
Recording
1 Load a blank tape into tape deck 2 and a
STANDBY-ON
disc into a disc tray.
2 Press VCD to select VCD/CD mode.
• You can program the tracks in the order
you want them to be recorded (see
Programming Tracks). If not, select the
disc by pressing VCD (CD 1•2•3) and
the tracks are recorded according to the
order on the selected disc.
3 Press RECORD to start recording.
™ The REC flag starts flashing.
• Disc will start playback automatically.
4 Press Ç to stop recording.
View Clock
You can view the clock (if it is set) if the
system is in Standby mode or when any
sound source is selected (VCD, TUNER,
etc.). The clock will be displayed for about
seven seconds.
• Press CLOCK•TIMER briefly.
™ "10:38
™ "--:--" will be displayed if the
VCD MINI HIFI SYSTEM
CD1 • 2 • 3 BAND TAPE 1 • 2
VCD TUNER TAPE
PAL/NTSC
TUNING PRESET
SEARCH STOP• CLEAR PLAY• PAUSE PREV
DIGITAL
DSC
SOUND
CONTROL PROGRAM RECORD DUBBING A.REPLAY DIM
MICROPHONE - LEVEL
PBC
RETURN
Clock Setting
The clock can be set in either 12- or 24-
hour mode, e.g. "12:00
Before setting the clock, you must be in the
View Clock mode.
1 Press CLOCK•TIMER to select clock
mode.
or 22:38" (the
2 Press PROGRAM to select 12- and 24-
PM
current time in either 12- or 24-hour hour mode.
™ If 12-hour mode is selected, "12:00"
mode) will be displayed depending
on whether you have selected 12- or starts flashing and the
24-hour mode. ™ If 24-hour mode is selected, "00:00"
starts flashing.
3 Set the hour with à or á on the
clock is not set.
system.
4 Set the minute with í or ë on the
system.
31/05/2001, 11:35 AM
VIDEO
AUX
NEXT
CLOCK•TIMER
VOLUME
" or "00:00".
AM
lights up.
AM
3139 116 20021