Table of Contents
Advertisement
Chapter 7.
7.1. Device Management
Use the Device Management screen to save the configuration changes from the RMT to the
switch or restore the switch's configuration back to the factory defaults.
You can also use this screen to restart the switch without turning off and on the power source.
Click Switch Internals > Device Management to display the screen as shown.
Figure 7-1 Switch Internals: Device Management
7.1.1.
Restoring the Configuration Back to the Factory Default
To restore the switch configuration back to the factory default, click Load Factory Default
Configuration in the Device Management screen.
7.1.2.
Saving Configuration
To save the configuration changes you made in the RMT, click Save Configuration to
Switch in the Device Management screen.
Switch Internals
This will erase ALL your custom settings.
Smart Ethernet Switch Series User's Manual
48
Advertisement
Table of Contents
