Table of Contents
Advertisement
Creating a 802.1Q Tagged VLAN
Follow the steps below to add a new port-based VLAN.
Right-click on the VLAN Table in the 802.1Q VLAN Configuration screen and click Add.
1.
A screen displays. Enter a unique number (2 to 4094) in the VLAN ID field to identify this
2.
VLAN.
Select the ports to belong to the VLAN.
3.
Click OK to save the changes and close this screen.
4.
Figure 6-14 Switch Configuration: VLAN Configuration: 802.1Q: Add
Port VLAN Mapping
Use the VLAN ID Selection screen to specify the VLAN to which untagged packets received
on the port are sent. For example, if you set the output VLAN ID of port 2 to 10, all untagged
packets received on port 2 are sent to the port(s) belong to VLAN 10.
Right-click on an entry in the Port VLAN Mapping list and click Set VLAN ID in the 802.1Q
VLAN Configuration screen to display the Port VLAN Mapping screen. Select a VLAN ID
and click OK to save the settings.
Figure 6-15 Switch Configuration: VLAN Configuration: 802.1Q: Port VLAN Mapping
Example: 802.1Q VLAN
In the following VLAN example, switch ports 1, 2, 3 and 4 belong to VLAN ID 2, ports 5, 6, 7
and 8 belong to VLAN ID 10 and ports 1, 9, 10, 11, and 12 belong to VLAN ID 15.
When an untagged packet is received on port 1, the packet is sent to ports 1, 2, 3, and 4 since
the output VLAN ID on port 1 is set to 2.
Smart Ethernet Switch Series User's Manual
43
Advertisement
Table of Contents
