Table of Contents
Advertisement
Smart Ethernet Switch Series User's Manual
Figure 6-12 Example: Port-based VLAN Configuration
If you do not activate a leaky VLAN feature in the VLAN Configuration screen, a unicast
packet (for example) received on port 1 will be sent to ports 2, 3, 4, 9, 10 and 11 only.
6.5.3.
802.1q Tagged VLAN
In 802.1q tagged VLAN, the VLAN information is contained in the frames (known as tagged
frames). When the switch receives tagged frames, it sends the frames to only ports that
belong to the same VLAN. In addition, the switch is able to add VLAN information to frames
before transmitting.
When you select 802.1Q VLAN in the VLAN Configuration screen and click Apply, the
802.1Q VLAN Configuration screen displays. Use this screen to set 802.1q VLANs.
41
Advertisement
Table of Contents
