Table of Contents
Advertisement
Appendix 1. Troubleshooting
P
R O B L E M
I cannot run the RMT.
The RMT cannot find my switch.
Smart Ethernet Switch Series User's Manual
C
A
O R R E C T I V E
C T I O N
Make sure you have installed the RMT successfully.
Try installing the RMT on a different computer.
Make sure the switch is powered on.
Check the Ethernet cable connection on both ends. Make sure the
cable length is not more than 100 meters.
Check that the Ethernet cable type is correct.
Check the LED for the corresponding connection port on the switch.
Use a different Ethernet cable if problem persists.
Power off and on the switch and try accessing the switch again.
50
Advertisement
Table of Contents
