Brother HL-5030 User Manual page 30

3
Open the manual feed tray. Slide the paper guides to fit the paper size.
4
Using both hands put paper in the manual feed tray until the front edge of the paper touches the
paper feed roller. Hold the paper in this position until the printer automatically feeds the paper in for
a short distance, and then let go of the paper.
Make sure that the paper is straight and in the proper position on the manual feed tray. If it is
not, the paper may not be fed properly, resulting in a skewed printout or a paper jam.
Do not put more than one piece of paper in the manual feed tray at any one time, or it may cause
a jam.
If you put any Media (paper, transparency and so on) in the manual feed tray before the printer
is in the Ready state, the media may be ejected without being printed on.
5
After the printed page comes out of the printer, put in the next sheet of paper as in Step 4 above.
Repeat for each page that you want to print.
Figure 1-11
Figure 1-12
ABOUT THIS PRINTER 1 - 13