About This Printer; What Is In The Box; Interface Cable - Brother HL-5030 User Manual

1

About this printer

What is in the box?

When you unpack the printer, check to see that you have all of the following parts.
5
The power cord may be slightly different than the one in the figure above, depending on which
country the printer was bought in.

Interface cable

An interface cable is not a standard accessory.
Some computers have a USB and a parallel port. Please buy the appropriate cable for the interface
you are going to use.
Most parallel cables support bi-directional communication, but some might have an incompatible pin
assignment or may not be IEEE 1284-compliant.
It is recommended to use a Parallel interface cable or USB interface cable that is no longer than 6
feet (2 metres).
When you use a USB cable, make sure it is a high-speed twisted cable (12 Mbps or 480 Mbps), and
that you connect it to the USB connector of your PC.
Please make sure that you use a Hi-Speed USB 2.0 certified cable if your computer uses a Hi-Speed
USB 2.0 interface.
Do not connect the USB cable to the front of your PC or to the iMac's keyboard.
The HL-5030 only supports the USB interface.
4
1
Printer
1
2
Drum Unit Assembly
(with Toner Cartridge included)
3
Quick Setup Guide
4
CD-ROM
5
AC Power Cord
2
Components may differ from one
country to another.
3
ABOUT THIS PRINTER 1 - 1