Brother HL-5030 User Manual page 27

4
Put paper in the tray. Check that the paper is flat in the tray at all four corners.
Do not put more than 250 sheets of paper (75 g/m
that paper is below the maximum paper mark ( ).
For two-sided printing, put the side that is going to be printed on (blank side) face down, with the
top of the paper at the front of the tray.
5
Put the paper tray firmly back in the printer. Check that it is inserted fully into the printer.
1 - 10 ABOUT THIS PRINTER
Figure 1-7
2
) in the tray, or paper jams may occur. Check
Figure 1-8