Brother HL-5030 User Manual page 119

5
Open the back output tray. Pull the jammed paper out of the fuser unit. If the paper jam can be
cleared, go to Step 7.
If you have to pull the paper toward the back of the printer, the fuser may get dirty with toner powder
and it may scatter on the next printouts. Print a few copies of the test page until the scattering of
toner stops.
Caution
After you have just used the printer, some internal parts of the printer are extremely hot! Wait for the
printer to cool down before you touch the internal parts of the printer.
6
Open the jam clear cover. Pull the jammed paper out of the fuser unit.
7
Close the jam clear cover. Close the back output tray.
6 - 8 TROUBLESHOOTING
Figure 6-8
Figure 6-9
Figure 6-10