Upright X27RT Service & Parts Manual page 25

MACHINE SETUP:
CALIBRATE LEVEL
10. Press [ENTER].
The display screen will show:
CALIBRATE LEVEL:
YES:ENTER.NO:ESC
11. Press [ESC] to abort the calibration or
[ENTER] to proceed with the calibration
process.
If [ENTER] is selected the display screen
should show:
CALIBRATE LEVEL:
TILT 0.0'.0.O'
12. Values should now read approximately 0.0,
0.0. If they do not repeat from step 9.
13. Switch the ignition off and on again.
14. Check that the machine now levels correctly.
SR3370 & SR2770 (CE) – 12864B
Maintenance Information
page 21