Daedong CK2610CHSE Manual page 37

Table of Contents

Advertisement

• three-point hitch and side mounted
implements make a much larger
arc when turning than towed equip-
ment. make certain to maintain
enough clearance for safe turning.
• to use mounted, semi-mounted
or towed equipment and trailers it
is required to use exclusively ce
marked implements, after reading
their operation handbooks carefully,
giving maximum attention to risks
connected with their association to
the tractor.
• implements must be hitched to the
tractor by means of the three-point
linkage. it is therefore necessary
to check couplings for compatibility
according to their classes.
The implement has to be fitted with
suitable supports in order to avoid
tipping or accidental shifting dur-
ing hitching. always check three-
directional fastening to the tractor
of the mounted or semi-mounted
implement, to avoid dangerous
TC220-BOBCAT-OM-01.indd 25
swinging and shaking during trans-
port and work that could jeopardize
the stability of the tractor implement
assembly.
• the cardan shaft must be always
ce-marked, provided with suit-
able guards and suitable to tractor-
implement coupling. follow all
directions of the operation manual,
concerning both the fastening ac-
cording to connection direction and
safety rules to avoid rotation of
protections (chains) and overlaying
of the telescopic tubes. also keep
articulation angles.
wARNINg
when a tractor with safety
frame is equipped with a front
loader, there is still a risk if the
implement is improperly used.
This risk is due to objects fall-
ing from above. The operator
has no protection against this
risk.
for safe operation
to reduce risks, the following precau-
tions should be used.
- only use loader equipped with a
load self-levelling system, i.e. of the
parallelogram type.
- only use specific implements for
the operation to be performed.
strictly follow the directions and
warnings in the loader's operation
manual.
- use the machine and the imple-
ment with caution, drive on plane
ground and avoid pits, excavations
and ditches. do not turn, start or
stop abruptly.
- if a front loader is mounted, it is
advisable to use a tractor with cab
or with a 4-post frame with fops
safety system. the loader installer
should carefully analyze all risks
and make all required adjustments.
1
2
-
1
2020-02-20 오후 2:49:14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents