Daedong CK2610CHSE Manual page 168

6
10 ck2610chse / ck3510(h,c,ch)se / ck4010(h,c,ch)se
-
(1) lock pin
TC220-영문-수출향(법인향)-OM-06.indd 10
WARNINg
•
Make sure that the PTO safety
cover is in its position before
driving the PTO shaft.
•
Never go close to the rotating
1 1
PTO or universal joint shaft. A
severe accident can happen.
•
before driving an implement
through the PTO, always make
C56O140A sure that all bystanders are
well away from the tractor.
•
When using the PTO drive with
a stationary tractor, always
make sure that the gears are
in neutral and that the parking
brake is applied.
•
The tractor PTO and universal
joint should not be interfered
by any surrounding parts.
T66O122A
WARNINg
•
before starting up any PTO-
driven implement hitched to
the three-point linkage, lift the
implement to its full height
and check that at least 1/4 of
the total length of the tele-
scopic section of the drive
shaft is engaged.
2020-01-23 오전 9:17:58